Sheet metal parts automated powder spray coating line

A typical powder coating line may include several components such as pretreatment system, drying oven, powder booth, curing oven, and conveyor system, etc., to move the workpiece through the various stages of the process.

1) Pre-treatment system:Automatic spraying pre-treatment and dipping pre-treatment, shot blasting and sand blasting are available

2) Drying oven:Drying oven which drying the water after pre-treatment is designed according to customers' actual conditions.

3) Powder coating system:Automatic spray, manual spray and Semi-auto (Auto-spraying with manual repairing spraying) are for your choice;

4) Powder recycling system:Cyclone equipment and cartridge filters is customized and introduced according to actual requirement by customer;

5) Curing oven:Tunnel curing oven, bridge type curing oven, Electric power heating curing oven, Gas-heating curing oven; Diesel heating curing oven, High temperature, and lower temperature curing oven is available for fitting your sole factory.

6) Conveying system:Various designs according to different requirement by customer on the basis of customers' workpiece and output information.

7) Control system:PLC control, with or without touch screen

8) Spraying equipment:Spray gun and reciprocating machine or robotic arm

1.  Energy saving and cost reduction: simultaneous recycling of powder, saving labor and energy consumption

2. Spraying quality: high powder adhesion rate, provide solutions for coating dead spots, color difference, shedding, etc.

3. Safety system: fire prevention and explosion-proof, high temperature and low temperature automatic alarm

4. Intelligent operation: PLC intelligent control system operation, simple to get started

5. Large cyclone recovery system: 98.9% recovery rate, clean and pollution-free working environment

6. Powder color change time: 10-15min

7. Temperature-controlled baking channel: up and down 5 ℃, workpiece baking effect is good

8. Application scope: all kinds of machinery, guardrail, shelves, aluminum profiles, hardware and so on

The price of electrostatic powder coating line is based on the workpiece size, the workshop size, the degree of automation, the required output, the heating energy and other related data to design the proposal and make the specific offer!