Ipeyinti ye-Electrophoretic esetyenziswa kumgca we-Ed Coating

Ipeyinti ye-Anode ineepoxy, i-phenolic kunye neengongoma ze-acrylic, i-epoxy, i-phenolic isetyenziswa kakhulu kwi-workpiece yensimbi ngasentla; I-acrylic isetyenziswa kakhulu kwiiprofayili ze-aluminium, i-alloys ngasentla, kuba i-acrylic inokwenza umbala.

Ipeyinti ye-Anode: i-epoxy, i-phenolic i-single-component (emnyama okanye i-gray), i-acrylic yenziwe nge-resin kunye nemibala eyahlukeneyo yombala we-cathode ye-cathode i-component-component, i-color paste, i-emulsion resin cathode ipeyinti: ukusebenza okungcono kunye nokukhuselwa kwendalo. Uninzi lwazo lunamacandelo amabini, ngaphandle kokuba umthengi unemfuno yokuba umbala wokunamathisela kunye ne-emulsion resin inokuxutywa kunye ngokulinganayo ukwenza icandelo elinye.

Qhagamshelana nathi Ityala

iinkcukacha zemveliso

Icandelo leMichiza

Igama lekhemikhali	Inombolo yeCAS.	Inombolo yeEC.
Ioli ye-Linseed	57-13-6	200-315-5
Phenolic resin	9003-35-4	---
I-pitch	8052-42-4	---
I-Barium sulfate	7727-43-7	231-784-4
Amanzi	7732-18-5	231-791-2

Umboniso weMveliso

Iimpawu zemveliso

1. Inqanaba, imbonakalo yefilimu egudileyo kunye nelungileyo;

2. Uzinzo lwesisombululo esihle sokuhlambela kunye nokuziqhelanisa nomjikelezo omde wokutshintsha;

3. Ukuxhathisa okunamandla kwe-shrinkage cavity kunye nesisombululo esinamandla sokuhlambela ukuchasana nokungcola;

4. Umphetho onamandla wokufihla amandla kunye nokumelana nokubola;

5. Ukugcwala okuhle kwefilimu kunye namandla amahle okufihla i-substrate;

6. Ilungele imizimba yeemoto, iinxalenye zemoto, izithuthuthu, izithuthi zombane, ukuhamba ngololiwe, oomatshini bobunjineli, izixhobo zasekhaya, ihardware, iziqwenga zentsimbi kunye namanye amashishini.

Umahluko

Ipeyinti ye-anode electrophoresis, ipeyinti ye-cathodic electrodeposition.

Apho i-anode enepeyinti ye-anode electrophoresis, i-acrylic acid, isetyenziswa kakhulu kwiimveliso ze-aluminium, i-aluminium oxide yepeyinti yokukhusela emva kweglosi phakathi kwe-50-90 degrees, i-anode electrophoresis ipeyinti encinci, isetyenziswa ngokubanzi kushishino lwe-aluminium.

Ipeyinti ye-Cathodic electrophoretic inokwahlulwa ibe: Ipeyinti ye-electrophoresis epoxy, ipeyinti ye-acrylic kunye ne-polyurethane electrophoretic paint.

Ipeyinti ye-Epoxy electrophoretic: ukusebenza kokutshiza kwetyuwa ephezulu, amandla okujula kunye nomngxuma onzulu kwi-substrate ye-phosphate yetyuwa yokusebenza kokutshiza kwetyuwa ukuya kuthi ga kwiiyure ezili-1,000, iimveliso ezikhulileyo ukuya kumnyama oqaqambileyo, omnyama, omnyama, ongwevu okhanyayo. Ebomvu, eluhlaza, kunye neminye yemibala nayo inezicelo, ipeyinti ye-electrophoresis epoxy yipeyinti enokuthi igqume i-substrate, isetyenziswa ikakhulu kwi-anti-corrosion primer, kunye neentsimbi zentsimbi zingasetyenziswa njengeemfuno eziqhelekileyo ze-topcoat.

Ipeyinti ye-Acrylic kunye ne-polyurethane ye-electrophoretic: inokumelana nemozulu ephezulu, ukumelana (QUV) umsebenzi otyheli, ukukhanya okuphezulu (i-85-90 degrees) isetyenziselwa ukukhuselwa kwe-coating, yongeza i-paste ekhethekileyo ingafakwa, ekupheleni kwesiphumo semibala eyahlukeneyo eqaqambileyo. umbala, kunye nokuphucula ukusebenza kwi-hardware yetyuwa yokutshiza ngokuthe ngqo kwi-electrophoresis.

Ncamathelisa umbala
Imbonakalo:	Imnyama okanye ingwevu, nokuba ivumela istratification encinci, i-agglomeration ayivumelekanga
Izinto eziqinileyo:	Mnyama 41+2%; Grey 50+2%
I-Fineness enye (ncamathisela):
PH ixabiso (25℃)	5.4+0.3
Ukuqhuba (25℃)	1400+300 μs/cm
Emulsion
Imbonakalo:	Ulwelo olulubisi olumhlophe okanye olubisi olutyheli, oluvumela imvula encinci, kodwa kulula ukuyivusa
Izinto eziqinileyo:	35+2%
PH ixabiso (25℃)	6.7+0.3
Ukuqhuba (25℃)	1000+300 μs/cm